Deks Olje D1 Marine Saturator Silken Finish 1Ltr for Teak

Proven over years from the Fjords to the Caribbean Islands.

Properties
Can be applied to both horizontal or vertical surfaces.
Saturates and protects all woods - Soft and Hard ; Oily and Dense.
Excellent penetration - non-film forming.
Replaces the natural oils lost from the wood - will not blacken the timber .
Transparent - Enhances the woods natural grain.
Deep penetrating, stabilises the timber - Protects against moisture ingress.
Easy maintenance - no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish.


Where to use
Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai ...
Softwoods : Pine, Spruce, Larch ...
Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals ...
Interior : flooring, paneling, stairs, doors, windows, door frames ...
Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
Direct on prepared woods
Horizontal - Vertical.

Coverage rate for maintenance: 8 to 12 m ²/l  
Multicoat coverage: 1 to 4 m ²/Ltr
Application temperature: +5 °C to +35 °C
Drying: 24 h.  
Setting up time before use: 3 days

Technical Data Sheet Pdf

The purchaser is responsible for choosing the correct product for its particular application.